P5200: CWFM 722 S

8 CH - Water Flow Control Monitors upgrade developed for P5200 CENTURA - AMAT®

Process controller P5200 LID/WALL Centura®


This device monitors the flow processes about cooling and heating Lid/Wall Centura Amat®. (Pic. A)
When the value of one of the 8 chambers is out of range, CWFM 722 S® will report an error, temporarily blocking P5200® RTP, until the value will in range.
If the value temporarily goes out of range that wall/lid of CWFM 722 S will get a red colors that will indicate this fluctuation, after 20 seconds it will turn yellow, to symbolize a persistent error, so it will be announced by an acoustic error signal.  

In this case (Pic. B), a basic HMI dashboard of water flows, can also be used for both lid and wall controls. 
*Best performance and compatibility guaranteed.
Pic. A: CWFM 722 S® 8 CH - 2 x Water Flow Control Monitors.
Pic. B: LID - A is out of range, represented in yellow, 2 HMI dashboard versions available.
  • Technical Data
  • Technical Specifications
  • Dimensions
Display 2x7” TFT with 16.7M colours
Touchscreen Capacitive
Processor iMX6 Solo
(Cortex A9 @ 800MHz & M4 @227MHz)
Memory 8Gbit DDR3 SDRAM and 16GB SD card
Operating °C
0 to 40°C (32 to 104°F)
* Each technical and software specification can be configured as required.
Model CWFM 722 S WFTM
Flow Range 0,2 l/min ÷ 4,5 l/max 70 ° * Customizable
Supply power 100 ÷ 250 VAL 50/60 Hz 110 W
* Each technical and software specification can be configured as required.
Base 20,8/530 Inches/mm
Depth 13,7/350 Inches/mm
Height 8,6/220 Inches/mm
* Each technical software specification such as flow range can be configured as required.


Will be possible monitor trend of flows in a time span, updated live.

You will be also in able to access the to set point configuration page. (Pic. C)
Default setting it is set to a value in the range of 2.00 l/min ÷ 4.00 I/min, but will be possible touching buttons, lowering or raising the level of 0.10 l/min.
Useful if you want to tighten the flow control to a specific range


This intelligent device will keep production under control, lowering the probability of generating production errors, raising standards.
Pic. C: LID - Setting page for LID, in bottom, the chart with trend of flows, updated live.
◆ Terms and Conditions:
1. Delivery terms: 4~5 weeks after PO & product incoming date
2. Payment terms: T/T 30 days after delivery
3. Warranty: 6 month after installation date for repair
4. Validity: 2 years from quotation date

Browse other Process Controls

PWF-016-S Amat Producer
PWF O16 S®
0 HE: ADI 72 S®

Request Info/Quote

Send a request our Team will contact You in 24 hours.
We use cookies to deliver you the best experience. By browsing our website you agree to our use of cookies.