CLUSTERLINE®: CSE WF/WT Control Monitors

8 CH - Water Flow/Temperature Control Monitors system, developed for CLUSTERLINE® - Evatec, Oerlikon.

Process controller


This controller of values monitors up to 8 channels, specifically 2 for monitors with temperature control and water flow.
When one value after 20 seconds will be out of range, CSE WF/WT® will report an error, temporarily blocking CLUSTERLINE Evatec Oerlikon®, until reset button will touched.

If there is an anomaly in the values a red reset button will appear, signaled by an outgoing error sound.

In this case it will be necessary the intervention of an operator who will acknowledge the error.
*Best performance and compatibility guaranteed.
CSE: WF/WT® - 4 Monitors, 8 Channels, Clusterline Evatec Oerlikon®.
CSE: WF/WT® Home dashboard, set point setting page, and water flow out of range, reset visible.


This device was created to stand up to the common problems and needs related to CLUSTERLINE®.


To interact and access this page, touch the appropriate key and enter the default password.
Then touch the switch button by moving it to ON.
To exit, simply tap the back button and sistem will return to the traditional control screen.


Work safely and access to the maintenance mode to silence the buzzer and operate without distractions.  
CSE: WF/WT® Temperature dashboard, and security page for unlock bypass mode.
SMG Technology Innovations is available for the customization, improvement, upgrading and updating of its products, to face the problems and unknowns present in the production field of the semiconductor industry.
  • Technical Data
  • Technical Specifications
  • Dimensions
Display 4,3" x 4 TFT with 16.7M colours
Touchscreen Capacitive
Processor iMX6 Solo
(Cortex A9 @ 800MHz & M4 @227MHz)
Memory 8Gbit DDR3 SDRAM and 16GB SD card
Operating °C
0 to 40°C (32 to 104°F)
* Each technical software specification such as flow range can be configured as required.
Model CSE: WF/WT® - 4 Monitors, 8 Channels
Flow/Temp Range 0 ÷ 40 l/min, 0 ÷ 100 °C.
Supply power 00 ÷ 250 Volt - 50/60 Hz.
Analog. Sig. Out:
1÷ 5 V - Each Channel - Flow/Temp
Alarm Out: 1 SPDT each Channel.
* Each technical software specification such as flow range can be configured as required.
Base 20,8/530 Inches/mm
Depth 13,7/350 Inches/mm
Height 8,6/220 Inches/mm
* Each technical software specification such as flow range can be configured as required.
◆ Terms and Conditions:
1. Delivery terms: 4~5 weeks after PO & product incoming date
2. Payment terms: T/T 30 days after delivery
3. Warranty: 6 month after installation date for repair
4. Validity: 2 years from quotation date
Official Supplier 

Browse other Process Controls

PWF-016-S Amat Producer
AMAT 0 HE: ADI 72 S®
P5200: CWFM 722 S®

Request Info/Quote

We use cookies to deliver you the best experience. By browsing our website you agree to our use of cookies.