Digital Exhaust Meter: DHM 43 S

Process control designed for Producer Amat®, also available for other applications.

DHM 43 S:
designed for PRODUCER®

Also available for other kind of applications.

DHM 43 S is a device compatible with Producer - Amat® and other applications.
This product will report an output error if the exhaust process is unstable.

When the exhaust value is out of range, the DHM 43 S, after 20 seconds, will block the Producer®.
This model is equipped with a bypass for errors, deactivated touching a “reset” button. (Pic. A)
In this case, after an error has occurred, signaled also by an error output sound, the system remains on guard protecting production and forcing an operator to touch the reset button to acknowledge errors.
Once the reset button is touched, the error lights and the corresponding acoustic signals will be deactivated.

it is recommended to make sure to bring back the value in the range before touching reset button, otherwise after 20 seconds the error will appear.
DHM 43 S: Digital Exhaust Meter.
Pic. A: DHM 43 S out of range, with reset button.
Touch the setting button, to access the to set point configuration page.

Default setting it is set to a value in the range of 0.10 inch ÷ 0.90 inch, but will be possible lowering or raising the level of 0.05 up to a narrow value between 0.45 ÷ 0.55 inch.
Remember that no new settings will be saved if button isn’t touched, instead you can use the cancel button to return to the default settings.
* Will be possible request different specifications about the set of the values.
  • Technical Data
  • Technical Specifications
  • Dimensions
Display Display 4,3” TFT with 262 K colours
Touchscreen Capacitive
Processor iMX6 Solo
(Cortex A9 @ 800MHz & M4 @227MHz)
Memory 8Gbit DDR3 SDRAM and 16GB SD card
Operating °C
0 to 40°C (32 to 104°F)
* Each technical software specification such as flow range can be configured as required.
Model DHM 43 S
Inches Range 0.10 inch ÷ 0.90 inch, * Customizable
Analog sig. Out 1 ÷ 5 V each channel
Alarm Out 1 SPDT each channel
* Each technical software specification such as flow range can be configured as required.
Base 6,5/155 Inches/mm
Depth 6,30/160 Inches/mm
Height 4,9/125 Inches/mm
* Each technical software specification such as flow range can be configured as required.
◆ Terms and Conditions:
1. Delivery terms: 4~5 weeks after PO & product incoming date
2. Payment terms: T/T 30 days after delivery
3. Warranty: 6 month after installation date for repair
4. Validity: 2 years from quotation date

Browse other Process Controls

PWF-016-S Amat Producer
P5200: CWFM 722 S®

Request Info/Quote

Send a request our Team will contact You in 24 hours.
We use cookies to deliver you the best experience. By browsing our website you agree to our use of cookies.